707307

M-Audio Hammer 88 Manual

10
Zoom out
Zoom in
Previous page
1/52
Next page
10
Toggle CC Values
It is possible to set a toggle value for the Pedal inputs or –/+ buttons, causing it to send one value when
pressed, and another value when pressed again. One CC value can be assigned to the – button, and a
separate CC value can be assigned to the + button. Use the Hammer 88 editor application to assign and
edit the controls on the keyboard.
When set to CC Latch, the buttons will light up in the following way:
• When the – button’s first program is selected, the – button will be blue and dimly lit.
• When the – button’s second program is selected, the – button will be blue and brightly lit.
• When the + button’s first program is selected, the + button will be blue and dimly lit.
• When the + button’s second program is selected, the + button will be blue and brightly lit.
Program Change, Bank LSB, & Bank MSB
The Pedal inputs and –/+ buttons can be configured to send a multi-part message, consisting of a Program
Change, Bank MSB, and Bank LSB message when pressed. This is useful to select preset sounds from a
specific bank on a connected synthesizer or virtual instrument. When set to Program, the buttons will light
white temporarily when pressed. To set the Pedal inputs or –/+ buttons to send combined Program
Change, Bank MSB, and Bank LSB Messages, use the Hammer 88 editor application.
CC Increment/Decrement
It is possible to configure the Pedal inputs and –/+ buttons to increase or decrease a value each time it is
pressed. This is useful if you want to step through values one by one each time a pedal or button is
pressed.
Each pedal will only increment or decrement its own parameter value. In other words, assigning one pedal
to increment a parameter and another to decrement the same parameter will cause the first pedal to send
values such as 1, 2, 3, etc. Pressing the second pedal will send values such as 127, 126, 125, etc, and will
not decrement from where the first pedal left off (for example 2, 1, 0).
When set to CC Inc/Dec, each of the buttons will light up blue briefly when pressed. The + button will only
increment and the – button will only decrement. Press + to increment to the value of 127 and then pressing
the – button will decrement the value of 126. Furthermore, pressing the – send values such as 127, 126,
125, etc, and will decrement from where the + button left off (for example 125, 126, 127.). Use the Hammer
88 editor application to change these messages.
Toggle Program Values
Using the Hammer 88 editor application, it is possible to set a toggle value for the Pedal inputs and –/+
buttons, causing it to send one value when pressed, and another value when pressed again. This means
that one value is sent the first time it is pressed, and another value is sent the next time it is pressed again.
When toggle/latching values are assigned to the – and + buttons, they will each trigger between two
program values per button (these can also be assigned to 2 separate channels). This means that one set of
Program values can be assigned to the – button, and a separate different set of Program values can be
assigned to the + button.
When set to Program Latch, the buttons will light up in the following way:
• When the – button’s first program is selected, the – button will be white and dimly lit.
• When the – button’s second program is selected, the – button will be white and brightly lit.
• When the + button’s first program is selected, the + button will be white and dimly lit.
• When the + button’s second program is selected, the + button will be white and brightly lit.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Hammer 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Hammer 88 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info