707299

M-Audio CTRL49 Manual

26
Zoom out
Zoom in
Previous page
1/49
Next page
26
Transpose
CTRL49’s keyboard will be transposed by this many semitones. This is the
same as the Trans setting in Main Mode or Setup Mode. The available
range is -36 to +36. 0 indicates the center (no transposition).
Keybed Curve This is the velocity curve of CTRL49’s keyboard. The available settings are
Linear, Exp1 (exponential), and Exp2 (exponential).
Keybed Sensitivity This is the overall velocity sensitivity of CTRL49’s keyboard. The available
range is 1–10. At 1, it would take a lot of force to generate the maximum
velocity value of 127. At 10, it is fairly easy to generate a maximum-velocity
note.
Pad Threshold This is the velocity threshold to trigger CTRL49’s pads. This setting can
help prevent false triggering or make it easier to trigger the pads. The
available range is 0–15.
Pad Curve This is the velocity curve of CTRL49’s pads. The available settings are
Linear, Exp1 (exponential), Exp2 (exponential), Log1 (logarithmic), and
Log2 (logarithmic).
Pad Sensitivity This is the overall velocity sensitivity of CTRL49’s pads. The available range
is 1–10. At 1, it would take a lot of force to generate the maximum velocity
value of 127. At 10, it is fairly easy to generate a maximum-velocity note.
Internal Tempo
This is the global tempo in beats per minute (BPM). When CTRL49 is using
its internal MIDI clock (see Clock Source below), this setting also
determines the speed of the Note Repeat (Roll) feature and Arpeggiator. The
available range is 30–300 BPM.
Tap Average This is the number of times you would need to press Tap Tempo for
CTRL49 to detect and enter a new tempo. The available range is 2–4
.
Tempo LED When CTRL49 is using its internal MIDI clock (see Clock Source below),
the Tap Tempo light will flash in time with the current tempo setting. You
can turn this feature On or Off.
Clock Source This determines whether CTRL49 uses its Internal MIDI clock or refers to
an External clock (e.g., from a DAW).
Save Global
Settings
If this setting is selected and its field says Push to save, you can press the
Data Dial to store your global settings. Once the field reads No changes,
the global settings are stored in CTRL49’s internal memory.
Send Program If this setting is selected, you can press the Data Dial to send all of
CTRL49’s current controller settings (encoder positions, switch states, etc.)
to your computer connected to the USB Port or to an external MIDI device
connected to the MIDI Out.
Firmware Version
This is CTRL49’s current firmware version.
Boot ROM
This is CTRL49’s current read-only memory version.
Factory Reset If this setting is selected, you can press the Data Dial to restore CTRL49’s
factory/default settings. Your CTRL49 will immediately power off and on
again with restored default global settings.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio CTRL49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio CTRL49 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Audio CTRL49

M-Audio CTRL49 Quick start guide - English, German, French, Italian, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info