586987
26
Zoom out
Zoom in
Previous page
1/36
Next page
Page 26
Appendix
Appendix
Specifications
Analog I/O
Number / Type Two inputs and two outputs / cross-coupled electronically
balanced or unbalanced, XLR connectors on Audio cable
Level +4 dBu nominal /+20dBu max. or –10dBV nominal /
+6dBV max., 600 load on outputs
Input Impedance Balanced mode: 24 k , Unbalanced mode: 12 k
Output Impedance Balanced mode: 100 , Unbalanced mode: 50
Output Drive Capability 600 impedance, 0.16 µF capacitance
A/D and D/A Type Crystal Semiconductor, 24-bit, 128X oversampling, delta-
sigma
Sample Rates 8 kHz to 50 kHz, including all standard rates with high-
resolution adjustment
Bit Depth 8, 16, 24 or 32 bit file types
On-board Buffer Size 8 Kbytes X 2, for L/R input and output
Analog Performance (measured in 24-bit mode with card installed in computer)
Frequency Response 20 – 20 kHz, +0/-0.35 dB
Dynamic Range >103 dB, A-wtd., analog in to analog out using -60 dBFS
measurement method
Signal-to-Noise >99 dB, A-wtd., analog in to analog out
Channel Crosstalk <-103 dB, analog in to analog out, 1 kHz signal @ -1
dBFS
Input THD+N 0.0022% typ., 1 kHz signal @ -1 dBFS, 22 – 22kHz BW,
analog input to digital output
Output THD+N 0.0015% typ., 1 kHz signal @ -1 dBFS, 22 – 22kHz BW,
digital input to analog output
Digital I/O
Number / Type One input and one output / AES/EBU or S/P DIF format,
transformer coupled, XLR connectors on Audio cable
Sample Rates 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Bit Depth 8, 16, 24 or 32 bit file types
On-board Buffer Size 8 Kbytes X 2, one each for input and output
MIDI I/O
Number / Type Two ports each with input and output / Standard opto-
isolated, 5-pin female DIN connectors on MIDI/Clock
cable
Buffer Size 64 bytes, receive and transmit
Clock I/O
Number External: one BNC input and output on MIDI/Clock cable
Internal: one input and output on board-mounted headers
Level / Impedance TTL / 75 ohm
Input Frequency Range 25 kHz to 27 MHz
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx ONE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx ONE in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info