587003
5
Zoom out
Zoom in
Previous page
1/32
Next page
Page 2
3 Before You Begin
We recommend that you read through the manual to acquire an overview of the installation
procedure and use of the LT-MADI. This manual will presume a working knowledge of the
Aurora converter. For additional information, please refer to the Aurora owner’s manual.
3.1 Contents
Verify that you received the following in the LT-MADI shipping carton:
LT-MADI card in cushioned antistatic bag
Warranty Registration Card
Lynx Installation CD
1
/
2
” Standoff Post
3.2 Optional Equipment
75-ohm Coaxial Cable with BNC connectors or Fiber optic cable for connection to MADI
devices.
3.3 Operation Requirements
The LT-MADI requires your Aurora converter to have Firmware Version 24 or above. This
should be verified prior to installing and configuring the LT-MADI card. To determine what
firmware revision your Aurora has, press the TRIM and POWER buttons at the same time with
the power to the Aurora off. If the LED flashes over the numbers 2 & 4 or above (i.e. 2 & 5, 3 &
1, etc.), then your unit is compatible with the LT-MADI. If pressing Power and Trim does not
cause any LEDs to flash, or causes a single number to flash, then your unit needs to be updated.
The Aurora firmware can be updated by a Windows PC or OSX Macintosh with a Lynx AES16
PCI audio interface installed, or via MIDI (note: firmware revision 13 or above is required for
MIDI programming). The Aurora firmware updater program is available for download from the
Lynx website at Support > Downloads. If your unit requires an AES16 to update because it has
firmware revision 12 or earlier, and you do not have access to one, there are two options for
customers within the USA and Canada:
Option 1: Send the Aurora and LT-MADI to Lynx Studio Technology in California. We
will update the Aurora, install the LT-MADI and do a full diagnostic test within one day
of receipt. It will be return shipped via 2-Day Air.
Option 2: Lynx Studio Technology will loan you an AES16 for updating the firmware in
your Aurora. For more information on the procedure and any questions, contact
support@lynxstudio.com or call 714-545-4700 extension 206.
If you are outside of the USA or Canada, please contact your local distributor for
additional firmware update options.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx LT-Madi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx LT-Madi in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info