586988

Lynx L22 Manual

20
Zoom out
Zoom in
Previous page
1/36
Next page
Page 20
Configuring Multiple LynxTWO’s
Configuring Multiple Lynx L22’s
More than one Lynx L22 card can be installed in a computer for additional audio
channels. If required, all Lynx L22’s in a computer can be configured to maintain
sample accurate synchronization during digital audio recording and playback.
Cards are synchronized in a master-slave arrangement. One card is selected as the
master which provides the word clock source for the other slave cards in the system.
From the master, the word clock signal is daisy-chained from one slave to the next.
Word clock signals can be connected internally using the Internal Clock Cable, which
is available from Lynx. The CLOCK OUT header of one card is connected to the
CLOCK IN header of the next card. A separate cable is required for each slave card in
the system.
Alternatively, the SYNC IN and CLOCK OUT connectors on the L2Sync cable can be
connected externally with a standard 75 ohm BNC cable.
Adapter ID’s in a Multiple Card System
When multiple Lynx L22 cards are installed in a computer they are automatically
assigned unique adapter ID numbers. These adapter ID’s provide a means to identify
and communicate with each Lynx L22 when using the Lynx L22 Mixer application and
to select audio devices in third party applications.
In the Lynx L22 Mixer, the adapter that a user wishes to control is selected from the
Mixer pull-down menu. In a system with four Lynx L22’s the adapters will be listed as
follows:
Lynx L22 1 Mixer
Lynx L22 2 Mixer
Lynx L22 3 Mixer
Lynx L22 4 Mixer
In each case, the adapter ID is the numeric character in each selection.
Most third party applications provide a setup or configuration menu for selecting a
desired wave audio device for recording and playback. With multiple Lynx L22’s in a
system, each device name will contain the adapter ID. For example, the first play
device on adapter 2 would be listed as “Lynx L22 2 Play 1”.
Selection of Master and Slave Clocks
In order to select master and slave Lynx L22’s in a system, each adapter ID must be
first physically associated with a Lynx L22 installed in a computer slot. Since ID
assignment is automatic, determining this association is somewhat trial and error. The
procedure is as follows:
1. Connect at least one analog output channel of each Lynx L22 to an amplifier,
mixing console or other equipment that will provide audio monitoring.
2. Choose an audio application that allows selection of wave audio devices for audio
playback.
3. Select “Lynx L22 1 Play 1” as the playback device.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx L22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx L22 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info