586988

Lynx L22 Manual

9
Zoom out
Zoom in
Previous page
1/36
Next page
Page 9
Please note that with 16 dB of headroom, the Lynx L22’s analog outputs are capable
of delivering +20 dBu signal levels. It is important to verify that the equipment you
are driving is capable of handling these signal levels in order to prevent clipping or
possible damage.
Digital Audio
The XLR connectors on the L22Sync Cable, labeled DIGITAL IN and DIGITAL OUT
are used for AES/EBU and S/P DIF digital audio connections. Connect AES/EBU
devices directly and select AES/EBU Digital Format in the Lynx L22 mixer application.
Connect to S/P DIF devices using the supplied XLR-to-RCA adapters. Select S/P DIF
Digital Format in the Lynx L22 mixer application.
Sync Input and Clock Output Connectors
Two BNC connectors on the L22Sync Cable, labeled SYNC IN and CLOCK OUT are
used to synchronize the Lynx L22 with external equipment. The connectors support
TTL signals and should be connected with 75-ohm coaxial cable. Connect the SYNC
IN connector to the clock output of an external device and select External as the Sample
Clock Source in the Lynx L22 mixer. Adjust the clock Reference to match the incoming
clock type.
CLOCK OUT is a word clock that tracks the sample rate of the Lynx L22. Connect this
output to the word clock input of an external device.
Header Connectors
The Header connectors labeled CLOCK IN and CLOCK OUT are used to synchronize
the Lynx L22 with equipment located inside your computer. For systems containing
multiple Lynx L22’s, these connectors are utilized to synchronize the sample clocks of
each card. The connectors support TTL level signals and should be connected using
the Lynx Internal Clock Cable, Lynx Universal Clock Cable or similar 75-ohm coaxial
cable.
Connect the CLOCK IN connector to the clock output of an internal device and select
Header as the clock source in the Lynx L22 mixer. Adjust the clock Reference to match
the incoming clock type.
The signal on the CLOCK OUT header is a word clock that tracks the sample rate of
the Lynx L22. Connect this output to the word clock input of an internal device or
another Lynx L22.
External Connections
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx L22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx L22 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info