586999
61
Zoom out
Zoom in
Previous page
1/68
Next page
Page 57
Q. I am using a mono input into the Line In of Hilo. I have the Line In assigned to my Monitors and Phones Output but
I am only hearing it one side (the side it is connected to). Why?
A. To monitor a mono input signal in the center of the stereo field, go to the Output Mix Routing Page and select the
Input you would like to monitor (make sure the white box is around the Input so that it is “focused” or selected). Under
the Input Meters is the MONITOR MODE select button. Tap that button to launch the menu of options. If your signal
source is plugged into the Left Input of the selected source, then select “Left”. If it is plugged into the Right Input,
Select “Right”. On the OUTPUT METERS you should now see your signal on the both the left and right sides. Note:
The MONITOR MODE selection is active PER INPUT and PER OUTPUT. While this makes the feature very flexible,
keep in mind you may need to select the correct mode for multiple outputs (such as MONITOR OUT and PHONES).
8 Specifications
Line In L/R
THD+N -114 dB @1kHz, -1dBFS, 20kHz filter, +22dBu trim
Dynamic Range 121 dB, A-weighted, -60dBFS signal method
Frequency Response ± 0.01 dB, 20 – 20kHz
Crosstalk 140 dB maximum @ 1kHz, -1dBFS signal
Full-scale trim settings + 0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
Input Impedance 200k Ohms balanced, 100k Ohms unbalanced
Female XLR connectors
Line Out L/R
THD+N -109 dB @1kHz, -1dBFS, 20kHz filter, +22dbu trim
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -135 dB maximum @ 1kHz, -1dBFS signal
Full-scale trim settings + 0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
Output Impedance 100 Ohms balanced, 50 Ohms unbalanced
Male XLR connectors
Monitor Out L/R
THD+N -107 dB @1kHz, -1dBFS, 20kHz filter, volume at max
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -135 dB maximum @ 1kHz, -1dBFS signal
Output level at max volume +24dBu or +10dBu, jumper selectable
TRS connectors
Headphone Out
THD+N -107 dB @1kHz, -1dBFS, 20kHz filter, volume at max
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -130 dB maximum @ 1kHz, -1dBFS signal
Output level at max volume +19dBu
¼” phone jack on front panel
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Hilo TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Hilo TB in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info