586999
53
Zoom out
Zoom in
Previous page
1/68
Next page
Page 49
4.7.5 Calibrate Touchscreen
The LCD Touchscreen has a grid that detects when you touch it to select or change settings. If you find that the touch
response gets slow or does not always engage properly, you may need to recalibrate the touch screen.
Push the Calibrate Touchscreen button.
The screen will go black and give you instructions for recalibrating
the screen.
Simply follow the instructions and the previous screen will come up when
done. Be sure to touch directly in the center of the target to give the most
accurate touchscreen calibration.
With a touch screen it is easy to engage the wrong function by mistake.
This screen allows you to back out of this command if you wish.
There are times when calibrating the touchscreen is necessary for
optimum performance. However if this setting was selected
unintentionally, now you can overrule the request and return to the
Display Menu page.
4.7.6 Knob Settings
This menu allows you to select which outputs can be adjusted with the Hilo rotary encoder. By default, the Monitor
Out and the Phones Out can be attenuated with the rotary encoder, and pressing in the knob will toggle between those
two choices. If additional choices are selected from the Knob Settings menu, then pressing in the Rotary Encoder will
toggle through all the Outputs that have been selected.
Monitor Out and Phones Out can be de-selected by clicking in
the adjoining checkboxes, and/or additional outputs can be
selected with their adjoining check boxes.
Up to three sources can be selected at one time
After the desired sources have been selected, turning the rotary
encoder from any Hilo screen other than the Outputs Mix
Routing page will change volume for the selected output and a
level meter will show onscreen.
Pressing in the Rotary Encoder Knob will toggle through the
available choices.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Hilo TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Hilo TB in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info