586999

Lynx Hilo TB Manual

39
Zoom out
Zoom in
Previous page
1/68
Next page
Page 35
There is an overload at indicator at the top of these meters. When potentially distortion-causing clipping occurs, this
indicator turns red and the associated text reads “OVER”. For an input, the Over indicator will activate when there are
three full-scale samples in a row, which indicates a high probability that clipping has occurred. For the outputs, the
Over indicator is an accurate reflection of an actual overload condition and the attenuation should be performed on the
input sources or digital outputs themselves when this occurs.
Before we explore how to route sources, we need to take a look at the “Single Tap Source Select” button, because this
impacts the way that sources are enabled.
4.4.8.6 Single Tap Source Select
One of the advantages of the Touch Screen GUI, is that
we can offer user-preferred options for the way onscreen
buttons behave, a big advantage over standard, fixed-
function hardware buttons. This is one such option.
1. For this parameter, Checked is the default. In this state, pressing an INPUT source button will instantly turn
that source OFF to ON or ON to OFF, the same function as the ON/OFF button below the fader. This allows for
quicker one-touch selection and muting of INPUT sources. However, the selected source will be present instantly
with full volume on first press or a previously set volume level.
2. When Unchecked, pressing an input source will only bring that source into focus. One must then press the
ON/OFF button to make the source active. The advantage is that you would have the opportunity to adjust the
level of that source before it is sent to the output. This mode would be typical for live use, where making an input
source live at full volume could have ear-shattering consequences.
For the remainder of this section, when mention is made of enabling sources whether this is accomplished by the
Single Tap method (Single Tap Source Select = ON) or Two Tap (Single Tap Source Select = OFF) will be left up to
the reader.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Hilo TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Hilo TB in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info