586999
35
Zoom out
Zoom in
Previous page
1/68
Next page
Page 31
4.4.8.1 Monitoring Modes
The default state for each input source is stereo, with two channels of input, streaming through a two-channel output.
There are 4 different options for routing an input signal to an output. These selections pertain to the operation of a
specific input source routed to a specific output. The setting is not global, and must be set for each output that is being
used.
Select the Output channel that you wish to listen to, then press the
desired input source (in this example, Line In).
Then tap the Stereo button under the input meters. You can now
choose between:
Stereo (default)
Left –audio from the Left input channel (in this case Line In
Left) streaming to both output channels
Right –the Right input channel streaming to both output
channels
Sum – combining both the Left and Right inputs into one Mono
stream which is sent to both the Left and Right outputs equally.
The summed signal is automatically attenuated by 6dB in order
to reduce the possibility of digital clipping.
The chosen option is shown on the button at the bottom of the Input
meters any time that input channel is selected.
Each input channel can be controlled and assigned independently for
each output.
For example, you can have Line In “Summed” sent to the Monitor
Output, while having Line In “Stereo” assigned to the Headphone
Output. This flexibility allows complex routing to be achieved very
easily.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Hilo TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Hilo TB in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info