586999

Lynx Hilo TB Manual

27
Zoom out
Zoom in
Previous page
1/68
Next page
Page 23
Touch on the type of meter you would like to see. The new meter will instantly appear. If no selection is made, clicking
anywhere on the Touch Screen outside of the menu will cause the menu to close.
4.2.1 Choosing the Meter Source
You can select any Input or Output Source to be shown on the Analog VU and Horizontal Meters.
4.2.1.1 For the Analog VU Meters:
Touch the Monitor Source Selection button that is centered at the bottom of the screen. Before touching the button, it
will show the current selection. A Pop-up will appear with two sets of input sources on the left and six sets of output
sources on the right.
Tap on the input or output source you need. The meter will reset and the Pop-up will close. The Monitor Source
Selection button now shows your new selection. The Pop-up will remain on the screen until you either make a
selection, or tap outside of the menu in order to close it.
4.2.1.2 For the Horizontal Meters:
This is the same process, but you can select different sources for each meter pair.
Touch the Monitor Source Selection button that is centered at the top of the screen for the upper meter set or the
Monitor Source Selection button that is centered at the bottom of the screen for the lower meter set. Before the buttons
are pushed, they will show the current meter selection. A Pop-up will appear with two sets of input sources on the left
and six sets of output sources on the right. These are the same options as for the Analog VU meters. Tap on the input or
output source you need. The meter will reset and the Pop-up will close.
Use the same procedure for the other meter set. . The Pop-up will remain on the screen until you either make a
selection, or tap outside of the menu in order to close it.
4.2.1.3 For the All I/O Meters
With the All I/O meter page, no selection is needed as all input and output sources are shown. The All I/O page is
useful for different reasons. When setting up your routing (explained later) this page gives you a global view of what
input channels are active and which outputs are receiving audio from at least one source.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Hilo TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Hilo TB in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info