586998
38
Zoom out
Zoom in
Previous page
1/56
Next page
38
2. Launch the Lynx Mixer (Windows: All Programs > Lynx Studio Technology. OS-X:
Applications)
3. The cards will each have their own tab on the left side of the Lynx Mixer. Click through
each tab and look at the “Preferred Clock Source” columns in the ADAPTER section.
Each card that has a sample rate next to “header” is a clock slave. The card that has no
sample rate next to header is the clock Master. If this card is NOT the first tab (i.e. card
#1) then its device order will need to be changed.
4. Click Settings > Advanced > Adapter Settings. Lynx Cards should show up with their
numerical identifier. For instance “3:E22” means this is an E22 that has hardware ID 3.
5. Use the “Move Up” or “Move Down” buttons to change the order to what is desired. For
instance, if you wish for the unit that appears as #3 to be #1, use the Move Up button two
times. It should now appear as “1: E22”.
6. After completing your selections, click “Save”, then close the Lynx Mixer. (IS A
REBOOT NECESSARY?)
7. To verify settings, re-launch the Lynx Mixer and make sure that the card in the #1 slot
does NOT have a sample rate next to “Header” under Preferred Clock Source.
8.1.3 Setting clock sources in the Lynx Mixer
This step is directly related to the choices made in Section 8.1.1: Establish clock connections
The correct settings will be context specific. Set the Sync Source for each card from the Lynx
Mixer by clicking the Tab for the device on the left side of the mixer page and choosing the
desired clock source from the Preferred Clock Source section of the ADAPTER page.
See Section 7.3.2: Adapter Section for details.
If one card is the Master and the other cards slave via the ICC cable, choose “Internal” for
the Master, and “Header” for the slaves. If all cards slave to word clock, select “External” for
them all. If they slave to Digital Inputs, choose the appropriate “Digital Inputs”.
It is good practice to save a scene after configuring the mixer for use.
8.1.4 Configure for use (Windows)
In Windows, one can use the Sound section of Control Panel to select whichever card is
desired as the default playback device. Unfortunately, Windows is known to jumble the
device order here. To determine which unit in the list is the one that you wish to use, follow
this process:
* From Control Panel > Sound > Playback, you will see all of the Lynx eXX Devices. Play
1+2 in this list will be labeled as “Speakers”. Click one of them to select.
* Click Properties > Advanced
* Click the “Test” Button
* Look at the Lynx Mixer and click through the tabs for each card. Whichever shows Meter
activity for the first pair of channels when “Test” is clicked corresponds to that instance.
* When you determine the desired unit, from the Playback tab of SOUND, right-click that
device and select “Set as Default Device”.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx E44 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx E44 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info