586998
8
Zoom out
Zoom in
Previous page
1/56
Next page
8
5 Installation Procedures
The procedure for installing the E22/E44 requires that you physically install the card inside
your computer before running the Driver Installer.
The Driver Installer will install the required driver files and the Lynx Mixer application, as
well as configure your system to recognize the E22/E44.
5.1 Hardware Installation
1. Turn OFF the power to your computer system and disconnect the power cords.
2. Touch a metal plate on your computer system to ground yourself and discharge any
static electricity.
3. The E22/E44 Digital I/O is set to AES by default. If you would like to switch the
protocol to SPDIF, this is done with jumpers JP701 and JP702 to set the mode, and
switch SW200 to set the format. In the case of the E44 you can switch both Digital
I/Os to SPDIF or have one be SPDIF and the other AES. Remember that both the
jumpers and switches must be altered to go from the default of AES to SPDIF. To set
the mode, refer to the graphic below for jumpers JP701 and JP702. The format is set
using SW200: Switch 1 controls Digital In/Out 1while Switch 2 controls Digital
In/Out 2 (E44 only). The ON position selects SPDIF format and the ON position
selects SPDIF format.
4. Remove the cover from your computer chassis and select an empty PCI Express slot
in your computer.
5. You should refer to your computer system documentation for any special instructions
on installing expansion cards and peripheral equipment.
6. Unscrew and remove the slot cover from your selected PCI Express slot.
7. Insert the E22/E44 into the selected PCI Express slot and press it down so that the
contacts are securely seated.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx E44 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx E44 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info