586997

Lynx E22 Manual

52
Zoom out
Zoom in
Previous page
1/56
Next page
52
LED Out: This means the card is NOT appearing to the OS. Try installing in a
different PCIe slot. Also try setting the Jumper for Prom 1 (See Section 8.4: Updating
Firmware). If all attempts are unsuccessful, try installing into a different computer
and see if the card appears after loading the driver.
The card shows up in the Operating System as a usable device, but will not pass audio:
1. Make sure that the E22/E44 has been assigned as the active device in the application
being tested. Many audio applications allow a specific audio device to be selected from a
configuration menu. Other applications will use whatever the operating system default
device is. In this case verify that the E22/E44 has been configured as the default playback
device for the system.
2. Check the Lynx Mixer Outputs Panel and see if there is meter activity for the appropriate
outputs being used. If there is, check the cable connections from the card’s outputs to the
monitoring equipment.
3. Click “Restore Defaults” in the Lynx Mixer from the MIXER menu.
Continuous clicking, popping or crackling noises in your audio:
1. Check clock master settings. In any digital audio configuration, there can be one, and
only one master clock. All other digital audio devices must be configured as slaves to the
designated master clock. Since the Lynx’s SynchroLock™ technology provides an
extremely stable and jitter-resistant clock, we recommend setting the card as the master
clock in your digital audio system. With multiple cards in a system, either all should
slave to external sources, or one card should be on Internal, the rest should be clock
slaves (Header). See Section 8.1: Configuring multiple cards
2. Check buffer settings in your audio application software. Smaller buffer sizes are
preferred because they reduce latency (the time it takes for an audio signal to travel
through your audio software). In some cases, however, setting too small a buffer size can
overtax your computer’s processor, particularly when running multiple tracks and/or a
number of DSP plug-ins. This can result in clicks and pops and other distortion in your
audio playback. Try increasing the buffer size from within the audio application or via
the ASIO control panel and see if your playback performance improves.
3. Disable Wi-Fi, Bluetooth, or other background devices that maybe be draining the CPU
performance.
Audio stops suddenly during playback or recording, or there are dropouts
1. Many new Operating Systems utilize very aggressive power management routines that
can disrupt real-time audio performance.
For Mac OS X users, in the Lynx Mixer from Settings > Advanced, there is an option to
“Disable CPU Power Management”. Make sure that is Checked (selected).
For Windows users, there are other settings that help cam significantly reduce these power
management mechanisms.
• In the Windows Control Panel > Power Options, set the Power Plan to “High
Performance”
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx E22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx E22 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info