586997
46
Zoom out
Zoom in
Previous page
1/56
Next page
46
8.4 Updating Firmware
The E22/E44 contains firmware that is field-programmable. These updates can improve
performance and enhance functionality of the card.
To program the Lynx card’s firmware, follow these steps:
Visit www.lynxstudio.com > Support > Downloads. Product = E22/E44.
Download file. Make sure all audio and non-essential software is closed
Run the updater, accept defaults
From the Welcome screen, verify that the new firmware version is more current
then the current firmware on the card If so, press “Program” to continue
When the updater is complete, power down the computer when prompted.
After a few seconds, turn the computer back on. The firmware should now be up-
to-date. You can verify the firmware revision from the Lynx Mixer > About Lynx
Mixer.
We encourage users to read the “Release Notes” for each firmware updater before running it,
just to insure that changes made are pertinent to your conditions of use. For instance,
sometimes there are firmware updates for specific operating systems or contexts of use. In
such a case, there is no point in updating unless you require those features.
On rare occasions a firmware update may fail. Depending on when in the process this occurs,
it’s possible that a failed firmware update may render the card unusable. Fortunately the
Lynx cards were designed with a quick fix. The card actually has two PROMs, and only one
of them is programmable. The other contains the factory firmware and cannot be field
programmed. Switching from prom 2 (the default, programmable prom) and Prom 1 (the
factory prom) will bring the card back to life and allow another chance to update the
firmware. Here are the steps to use Prom 1 to recover from a failed update attempt:
1. Turn off and unplug the computer and remove the E22/E44 card.
2. On the Component side of the board, towards the back, there is a set of four switches.
Switches 3 and 4 control the Prom selection.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx E22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx E22 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info