587002

Lynx Aurora LT-TB Manual

49
Zoom out
Zoom in
Previous page
1/55
Next page
49
Smaller buffer sizes will give you lower latency. However, if a buffer size is too small for the
system or context, audio anomalies such as clicks and pops may occur. It is recommended to
become familiar with altering the LT-TB buffer size to best suit the context of use.
Once you determine the lowest achievable buffer size, you will typically have to double the
size each time you double the sample rate, but the effective latency will remain constant. For
example, if a system is capable of operating at a buffer size of 128 samples at 48 kHz, then
for a 96 kHz project, the buffer size will likely need to be increased to 256 samples.
8.4 Updating Firmware
The LT-TB contains firmware that is field-programmable via the Thunderbolt connection.
These updates can improve performance and enhance functionality of the Aurora-TB.
To program the LT-TB firmware, follow these steps:
Visit www.lynxstudio.com > Support > Downloads. Product = Lynx LT-TB.
Download file. Make sure all audio and non essential software is closed
Run the updater, accept defaults
At the main updater welcome screen, set the drop down menu for “Select unit to
update” to LT-TB
Press “Program”
When the updater is complete, power down and unplug the Aurora.
Plug the Aurora back in and turn it back on. The firmware should now be up-to-
date. You can verify the firmware revision from the Lynx Mixer > About Lynx
Mixer.
In addition to the LT-TB, the Aurora itself has firmware. The Aurora firmware can also be
updated via the Thunderbolt using the same method as described. The only difference is
keeping the Aurora as the “Unit to Update”, rather than the LT-TB card.
We encourage users to read the “Release Notes” for each firmware updater before running it,
just to insure that changes made are pertinent to your conditions of use. For instance,
sometimes there are firmware updates for the Aurora that only pertain to a specific LSLOT
Expansion card. In such a case, there is no point in updating unless you use that card.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Aurora LT-TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Aurora LT-TB in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info