541018
6
Zoom out
Zoom in
Previous page
1/9
Next page
V7 Version 2.0 March 2012
Page 6 of 9
Even though there is an automatic fuse in the instrument it is VERY IMPORTANT
to use an external fuse (max. 3A). Power supply cables should use a minimum of
0.5 mm² wires. To prevent damage to the LX9000/8000/8080 digital unit after a
short circuit on the RS485 bus there is an automatic fuse.
If a short circuit occurs then the 57 mm unit will appear not to work anymore. The reason is
not the defect of 57 mm unit – it is due to the hot automatic fuse. Turn off the
LX9000/8000/8080 system and wait for the automatic fuse to cool down.
3.1 Installing the LXNAV V9
The LXNAV V9 vario should be mounted in a standard 57 mm hole.
Remove four screws. Install V9 into the panel, screw back all screws and.
Be sure that LXNAV V9 is placed far enough from compass. Inside is stepper
motor which generates magnetic field interferences.
3.2 Connecting LXNAV V9
LXNAV V97 is connected to main unit through RS485 bus. SC cable is used for external
switch, for switching between climb and cruise mode. In case that SC is connected to flaps
switch, VP (vario priority) is connected to switch on stick. Inputs IN1..4 are used to connect
to gear switch, air brake , etc...
3.3 Cutout of V9
Length of screw is limited to max 6mm!
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV V9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV V9 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info