541016
13
Zoom out
Zoom in
Previous page
1/48
Next page
V7 Version 3.01 October 2013
Page 13 of 48
Mechanical needle displays vario, netto, relative or speed to fly value. It can be setup
scale can be chosen (when ordered) in the range of -5 to 5 or from -10 to 10. Within the
software the range can be set to 2.5, 5, 10m/s or 5, 10, 20kts or 500, 1000, 2000fpm.
Upper number can be configured as average vario, time, flight time, task remaining time,
netto value, outside temperature or thermal average, steering course. It can be setup
separately for climb mode or cruising mode.
Lower number shows current altitude, distance to goal, arrival altitude, true airspeed, Last
60 minutes speed, altitude in feet or flight levels.
Speed to fly bar symbol is indicating which speed you have to fly according to current
MacCready setting, sink rate and speed. One arrow means 10units of speed faster or slower.
Up red arrows mean fly slower and down blue arrows mean fly faster.
Red diamond symbol can show average vertical speed or g-force.
Blue arrow symbol shows current MacCready value.
Green T symbol represents last thermal average value.
White bar, which is not shown on the picture above, displays arc between minimum and
maximum vertical speed value in last 20 seconds.
In LXNAV V7 there is an integrated 3 axis +-6g accelerometer. All accelerations can be
recorded and indicated with accelerometer red bar. Red bar, which is not shown on picture
above, displays maximum negative and positive acceleration in g.
BlueTooth symbol indicates detected BlutoothModule for V7 on PDA port.
Flarm symbol indicates presence of flarm device (pink) and also detection of flarm traffic
(red).
5.1.1 Flarm Warning
If Flarm warnings are enabled the following is a typical screen display:
The screen indicates relative position of threat. In the first image two gliders are
approaching inbound below, the second screen two gliders are approaching inbound, one on
left side and another the right . On third image we have active “undirected warning”
together with other flarm warnings with known direction.
5.1.2 Direct link between PDA and GPS
LXNAV V7 is able to make direct link connection between PDA and GPS. Normally GPS and
PDA communicate with LXNAV V7. In the direct link mode the user can transfer data from
PDA to GPS (Flight recorder) or the opposite way (read the flight). The direct link is
normally initiated by software such as SeeYou Mobile or ConnectMe.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV V7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV V7 in the language / languages: English as an attachment in your email.

The manual is 5,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LX NAV V7

LX NAV V7 User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info