541015
24
Zoom out
Zoom in
Previous page
1/29
Next page
V3 Version 1.0 November 2012
Page 24 of 29
8 Installation
The LXNAV V3 requires a standard 57 mm cut-out.
One pressure connector is fitted to the back of the V3 vario. It’s total energy (TE) pressure
connector
8.1 Installing the LXNAV V3
The LXNAV V3 vario should be mounted in a standard 57 mm hole.
Remove rotary knob cap with a knife or flat screw driver, then hold knob and unscrew it.
Remove remaining three screws. Install V3 into the panel, screw back all screws and knob.
Make sure that between knob and panel is some space, to push button.
Be sure that LXNAV V3 is placed far enough from compass. Inside is stepper
motor and speaker which generates magnetic field interferences.
8.2 Connecting LXNAV V3
LXNAV V3 is connected to 12V DC power supply. Red wire goes to + positive and blue wire
goes to – ground.
Instrument has no internal fuse. 3A external fuse is required! Power supply
cables should use a minimum of 0.5 mm² wires.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV V3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV V3 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LX NAV V3

LX NAV V3 User Manual - German - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info