541023
12
Zoom out
Zoom in
Previous page
1/33
Next page
NANO
3
Version 1.0 April 2014
Page 12 of 33
3.6 NanoPower cable
The NanoPower cable is a special device which converts 12V to 5V providing a power supply
for the NANO
3
and a PDA. It also translates a serial signal to match the NANO
3
signal level
and a PDA or computer signal level.
Connect the red and black wire to 12V power supply. Red is positive.
Maximum input voltage is 24 Volts.
The NanoPower has two plugs. On one side there is a standard USB-A connector. Please
use the included USB-A to mini-USB cable and plug the NANO
3
on this side. Any standard
USB-A to mini-USB cable can also be used. On the other side there is an RJ45 plug. This
plug is designed for a PDA or a computer.
The RJ45 plug is NOT designed in accordance with the IGC standard. It can be
used only with a dedicated cable. Do not plug any unknown cables in to it as this
may damage the NanoPower circuit.
Pin description on the NanoPower RJ45 is given in the picture below.
1 2 3 4 5 6 7 8
Pin numbers
Pin number Description
1,2 Ground
3 (output) Transmit from NANO
3
RS232 (e.g. Computer, V7)
4 (input) Receive to NANO
3
RS232 (e.g. Computer, V7)
5 (output) Transmit from NANO
3
LVTTL (e.g. Oudie, HP302)
6 (input) Receive to NANO
3
LVTTL (e.g. Oudie, HP302)
7,8 5V OUTPUT (maximum 1A)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV NANO3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV NANO3 in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info