541014
25
Zoom out
Zoom in
Previous page
1/27
Next page
NANO Version 2.0 May 2012
Page 25 of 27
6 Troubleshooting
Q: My computer does not recognize the NANO as a USB mass storage device?
A: Make sure that that NANO is turned off before connecting to computer.
Q: My flight has no security.
A: Switch off the NANO for five minutes and turn it on for normal operation. If the flight is
still not secure contact us.
Q: When I power on see all green LEDs blinking and the red LED is illuminated.
A: This means that your flight recorder has lost security. Contact us for further details.
Q: When I power on I see one green LED and the red LED is illuminated.
A: There is a problem with the SD card. We recommend that you eject SD card and format
it.
Q: Is the internal LiIon battery for the NANO end-user replaceable or would I need to send
the unit back to LXNAV or a dealer to have the battery replaced?
A: User can replace Li-Ion Battery. See chapter 4.11
Q: I can't read nano on my notebook.
A: Change power management scheme on your notebook, or connect notebook to power
supply.
Q: When I connect NANO to my notebook, message "USB device connected" would appear,
disappear, appear, etc. from the laptop screen.
A: Change power management scheme on your notebook, or connect notebook to power
supply.
Q: Can I open files from NANO on Apple computer?
A: Yes.
Q: I run Ubuntu on my laptop so cannot run NanoConfig.exe.
A: NanoConfig is Windows application, that runs only on windows operating system.
Q: Can I declare task with OUDIE?
A: Yes, declaration can be done via serial cable or over BlueTooth. Please read step by step
instructions
http://www.lxnav.com/downloads/manuals/FAQ_Upload_declaration_from_OUDIE%20to%2
0NANO.pdf
Q: My NANO will not turn off or function. It is displaying from left to right: no light, green
light, green light, no light, red light. How can I fix this?
A: That combination of LED's appears only in case of SD card error. That happens only if
SD card is not inserted properly in socket. It's hard to eject SD card. Now you must remove
SD card and insert it back, then everything will be ok. To turn off NANO from described
position the only way is to use the reset button with a paperclip or similar device.
Q: When I run nanoConfig, I'm getting errors.
A: Probably Microsoft Net Framework is not installed.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV Nano at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV Nano in the language / languages: English as an attachment in your email.

The manual is 4,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LX NAV Nano

LX NAV Nano User Manual - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info