541011
128
Zoom out
Zoom in
Previous page
1/151
Next page
LX90xx system Version 4.0 February 2014
Page 128 of 151
Use the PAGE selector knob to modify the MacCready setting. Refer to Chapter 6.5.6.2 for
more details.
It is also highly recommended to check the safety altitude setting. Refer to Chapter 6.1.1 to
find out how to define the safety altitude.
8.1.5 Preparing a Task
While it is advisable to prepare the task properly before taking off and thus avoid mistakes
made in a haste, all the following actions, preparing, editing, loading and saving, can be
done while in the air. But then, the task cannot be declared in the air.
There is only one task. This task will be automatically declared in the IGC file on
take-off. The task can also be modified during flight but any changes will not be
written to the IGC file.
There are currently three methods to create a task.
Read waypoint and task file from SD card and load a saved task.
Load a similar task and modify it.
Enter task manually.
It is very important to check the task prior to take-off. Check the turning points
sequence, distance between points, bearings and total task distance. Visually
check the task and observation zone geometry in the map view.
8.1.5.1 Assigned Area Tasks (AAT)
In fact an assigned area task is a speed task where the task distance is not exactly defined.
The pilot has limited influence on the task geometry due to larger observation zones
(assigned areas). The pilot decides how far he will fly into each individual area to reach
best average task speed and not finishing the task earlier than the designated task time.
An assigned area task has the same structure as other tasks and all known methods to enter
are the same as described. The only differences are larger observation zones having a
specific geometry. Use the ZONE button (see chapter 6.7.4) to modify the individual
observation zone.
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV LX9070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV LX9070 in the language / languages: English as an attachment in your email.

The manual is 12,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LX NAV LX9070

LX NAV LX9070 User Manual - Dutch - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info