541011
116
Zoom out
Zoom in
Previous page
1/151
Next page
LX90xx system Version 4.0 February 2014
Page 116 of 151
and finish zone. Start out the top will enable detection of start, when leaving start sector
from the top of it.
The Navigate to nearest point option is very useful and actually a must if a
finish cylinder is used with a significantly large radius. Enabling this option will
calculate the final glide to the edge of the cylinder rather than to the centre of
the cylinder.
There are also several options in this menu which will help competition pilots to have a less
stressful start.
6.7.5.1 Gate Time
Gate time is the time when the start gate is going to open. If this value is entered the
instrument will not give you any message about starting a task before the gate time is
reached. A notification will be given when the gate is opened.
6.7.5.2 Below Altitude Start Procedure
On some competitions there is a rule that a pilot must be below a defined altitude for a
certain amount of time. Enter Below alt. and Below time to use this option. An
indication will be given on the final glide symbol. Character “B” will be displayed before the
MacCready value which indicates that the final glide is in below altitude mode.
The lower number shows the difference to the set altitude. Negative values mean altitudes
below set altitude. The upper yellow number indicates the number of seconds left to be
below the set altitude. Chevrons indicate meters below or above required altitude. Each
line represents 10 m. A message
“You were XX seconds below YYYYm!”
is displayed once
you fulfil the conditions.
6.7.5.3 Maximum Start Speed and/or Maximum Start Altitude
A lot of competitions are limiting the start altitude and/or start ground speed. The system
helps pilots to cross the start line at the correct altitude with correct ground speed. Enter
Start alt. and/or Start gsp. to use this option. An indication will be shown on the final
glide symbol. Character Awill be displayed before the MacCready value if a start altitude
was entered and/or character “G” will be displayed if a start speed was specified.
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV LX9070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV LX9070 in the language / languages: English as an attachment in your email.

The manual is 12,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LX NAV LX9070

LX NAV LX9070 User Manual - Dutch - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info