541011
76
Zoom out
Zoom in
Previous page
1/151
Next page
LX90xx system Version 4.0 February 2014
Page 76 of 151
the pilot of the maximum take-off weight. Empty weight is weight of the glider without
pilot and ballast. The overload factor is calculated as:
weightgliderREFERENCE
ballastWaterweightPilotweightgliderEmpty
overload
..
....
Pilot weight is set in the Flight recorder menu (see Chapter 6.1.2).
For aircraft with flap, it is also recommended to enter flap position labels and speed range
for corresponded flap position. Speed range shall be given for reference wing load or
reference weight.
Once speed range is entered, the system will be able to display requested flap position
based on current wing loading and g-factor.
6.1.14 Profiles and Pilots
All settings and navigational page layouts are stored in a profile. Profiles can be used in
different ways:
For club operation or multiple pilots sharing the same glider. Each pilot can have his
personal profile.
When the user is flying a glider which can have a different wing spans. In this situation
the pilot has two profiles, one for each configuration.
When a pilot is flying in several different locations. A separate profile for each location
can be created (examples: France, Spain, Namibia, WGC2014).
Profile consists of two parts:
Navigational page layout defines which navboxes and symbols are visible on
navigational page. It defines colour of navboxes, font sizes and colours, how many
navigational pages are visible and which modes are enabled. Navigation page layout
can be setup with LX Styler or on device itself (See chapter 7).
Device settings includes glider polar, selected databases, selected airspace and
waypoints file, map colours, vario indicator settings and flight computer properties.
Device settings can be modified on device itself through setup menu (See
chapter 6.1) or with LX Styler.
An active profile is selected when the system is powered on (see Chapter 8.1.2).
Use this dialogue to add a new profile, delete a profile, load/save a profile, copy device
settings, change name for an existing profile and to activate a profile. The active profile is
the profile which is currently being used. Select a profile using PAGE selector knob. Press
TO USB or TO SD for the profile will be stored to a USB stick or SD card. A profile is stored
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV LX9070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV LX9070 in the language / languages: English as an attachment in your email.

The manual is 12,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LX NAV LX9070

LX NAV LX9070 User Manual - Dutch - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info