541009
14
Zoom out
Zoom in
Previous page
1/118
Next page
4.1.1 Buttons
All buttons have a dynamic function; the first time one presses each button, it displays its
function without executing any action. Not all buttons have a function on every page. In
some cases buttons have a long press function.
4.1.1.1 Power Button
The power button is the top-left button with the ON/OFF symbol on left side. It has multiple
functions. Primarily it is used to switch the LX8000 system on and off.
When Lx8080 is turned off, it must stay turned off for at least 10 seconds,
because LCD needs full power reset. If Lx8080 is turned on immediately after
power off, it may happen that screen will not reset and will become gray.
4.1.2 Rotary Switches (Knobs)
The LX8000 has four rotary knobs. Each has a single function with the exception of the
zoom knob which has, in some cases, a function other than zoom. With the upper-left rotary
knob the volume can be adjusted. The upper-right rotary switch is the mode selector (it
changes the mode of the operation). At the lower-right is the up/down rotary switch which
is used for selecting sub-pages, sub-menus and editing menus. At the lower-left is the zoom
knob which is multifunctional. While its main function is to change the zoom level within
graphic mode, it can also be used if an error is made during editing; it is possible to move
the cursor back by rotating this knob. However this can only be done if 'editing' is active
which is shown by the cursor blinking.
4.2 Switching on the Unit
After a short press of the power-on button the LX8000 and vario unit will turn on. A few
seconds later the LX8000 digital unit welcome screen will appear. The first screen shows the
version of the boot loader followed by the version of the Linux kernel screen and then the
file system screen.
The boot procedure normally takes 15 seconds but in the case of a firmware update or
system check it can take more time. The final boot screen displays information about the
LX8000 firmware and the IGC serial number.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV LX8080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV LX8080 in the language / languages: English as an attachment in your email.

The manual is 8,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LX NAV LX8080

LX NAV LX8080 User Manual - German - 158 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info