541008
82
Zoom out
Zoom in
Previous page
1/118
Next page
Usually a task sheet with observation zone definitions matching the LX8000 observation zone
definition will be given. An example of a task sheet is shown on the previous page.
However when an assigned area is defined only with two radials and two radii some
calculation must be accomplished.
Let us assume an assigned area defined as:
Radial1=30°, Radial2=70°, Min.radius=50 km and Max.radius=200 km
To convert this description the following calculation must be performed:
Direction set to FIXED.
Angle12= (Radial2-Radial1)/2+180°=230°. Attention should be paid with northerly
directions.
Angle1= (Radial2- Radial1)/2=20°.
Radius1=Max.radius=200 km.
Radius2=Min.radius=50 km.
7.2 Flying a Task
After take-off the unit will switch to flying mode. The pilot will notice this because the
statistics page will change from logbook view to flight statistics.
7.2.1 Starting a Task
Before starting a task (in task mode) a character S will be displayed on the final glide
symbol. This indicates that the task has not yet been started. The lower number tells you
at what altitude you will start. For more advanced start options such as maximum start
speed, maximum altitude and before start altitude see Chapter 5.7.4. Once you decide to
start the task and glider enters start observation zone, the message
“Inside start zone”
will
be displayed.
You may now leave the start observation zone and fly towards the first turn point.
When leaving the start observation zone the message
“Task started”
will be shown.
Ground speed and pressure altitude are also shown in the message. At the bottom two
buttons are displayed. Use the CLOSE button if this was not a valid start and you want to
remove the message from screen. If message is removed it will appear again next time you
leave the start zone. If you press the START button navigation will be advanced to the first
turning point.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LX NAV LX 8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LX NAV LX 8000 in the language / languages: English as an attachment in your email.

The manual is 8,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LX NAV LX 8000

LX NAV LX 8000 User Manual - German - 158 pages

LX NAV LX 8000 Quick start guide - Dutch - 15 pages

LX NAV LX 8000 User Manual - Dutch - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info