775752
63
Zoom out
Zoom in
Previous page
1/80
Next page
63
DO937DV
www.domo-elektro.be
CZ
· Na dveře si našroubujte madlo na otevírání (viz obrázek).
16
· Jakmile mrazničku usadíte na místo, nechte ji ještě 24 hodiny stát v klidu než ji zapnete, aby se usadilo
chladící médium.
· Po zapnutí bude přibližně 12 hodin trvat, než se uvnitř mrazáku nachladí požadovaná teplota.
· Klimatická třída určuje minimální a maximální teplotu okolí, pro správnou funkci přístroje. Označení
klimatické třídy najdete na štítku na zadní straně přístroje.
· SN: Subnormální : teplota okolí mezi 10°C a 32°C
· N: Normalní : teplota okolí mezi 16°C a 32°C
· ST: Subtropická : teplota okolí mezi 16°C a 38°C
· T: Tropická : teplota okolí mezi 16°C and 43°C
PŘEHOZENÍ DVEŘÍ
Tato mraznička má dveře, které se dají přehodit a otevírat na opačnou stranu. Pokud je chcete přehodit a
přešroubovat panty, zavolejte odborný servis nebo se alespoň zeptejte zkušeného technika.
Před začátkem úpravy dveří musí být mraznička prázdná a vypojená z el. sítě.
Odšroubujte 2 šrouby z horní strany krytu.
1. Vyšroubujte oba šroubky v zadní části krytu mrazáku.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It's better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
2. Odejměte horní kryt mrazáku.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It's better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Luvion SONIC BABY TOOTHBRUSH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Luvion SONIC BABY TOOTHBRUSH in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info