775752
6
Zoom out
Zoom in
Previous page
1/80
Next page
6
DO937DV
NL
· Installeer de handgreep.
16
· Laat het toestel 24 uur staan vooraleer het aan te zetten. Zo kan het koelmiddel zich zetten.
· Laat het apparaat gedurende 12 uur werken zonder levensmiddelen zodat het toestel tot de gepaste
temperatuur aoelt.
· De klimaatklasse geeft de minimale en maximale omgevingstemperatuur weer voor de goede
werking van een toestel. Je kan de klimaatklasse vinden op het typeplaatje aan de achterzijde van het
apparaat.
· SN: Subnormaal: omgevingstemperatuur 10°C tot 32°C
· N: Normaal: omgevingstemperatuur 16°C tot 32°C
· ST: Subtropisch: omgevingstemperatuur 16°C tot 38°C
· T: Tropisch: omgevingstemperatuur 16°C tot 43°C
DRAAIRICHTING VAN DE DEUR WIJZIGEN
De diepvriezer heeft een omkeerbare deur. Als je de scharnieren van de deur naar de andere kant wil
brengen, is het aanbevolen om contact op te nemen met een erkende reparateur om hem het werk te
laten uitvoeren. Voordat je de draairichting wijzigt, controleer of de stekker uit het stopcontact is gehaald
en dat het apparaat leeg is.
1. Verwijder de schroeven achteraan het bovendeksel.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It's better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
2. Haal het bovendeksel van de diepvriezer af.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It's better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Luvion SONIC BABY TOOTHBRUSH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Luvion SONIC BABY TOOTHBRUSH in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info