532761

Luvion PRESTIGE TOUCH Manual

6
Zoom out
Zoom in
Previous page
1/124
Next page
6
OVERVIEW OF PARENT UNIT (MONITOR)
1. Coloured LEDs The green LED indicates that the monitor is switched on. The green/red
LEDs indicate the volume level of the camera (from low to high).
2. Microphone Recieves sound from the area around the parent unit and transmits it to the
baby unit. This will only happen when the Talk back button is pressed.
3. Play/Stop button Press this button to start or stop the baby unit playing a lullaby.
4. Next button Play the next lullaby. There are three dierent lullabies available.
5. Zoom The video can be set at normal or double size by pressing the zoom button. When
the video is in double size mode, the
buttons can be used to view the parts
outside the parent unit screen. Press the zoom button again to return to normal size. In the
double size mode 2x is displayed at the top of the screen.
Note: There is no sound in the zoom mode. Exit the zoom mode to restore the sound.
6. Left (A) button Press left
(A) to automatically switch between multiple cameras. The
screen changes channel every 3 seconds. Use in a menu to move your selection to the left
7. Down (-) button Press down
(-) to decrease the volume. Use in a menu to move your
selection down.
8. OK button To conrm your selection in a menu press OK.
9. Up (+) button Press up
(+) to increase the volume. Use in a menu to move your selection
up.
10. Right (M) button Press right
(M) to switch manually between multiple cameras. Use in a
menu to move your selection to the right.
11. Menu button
Press this button to enter the main menu. Press menu again to exit the menu.
12. LCD screen Displays the video from the baby unit.
13. Talk button Press this button to speak through the baby unit. The
icon will then be
displayed on screen. When multiple baby units are used, you will speak through the unit
currently being displayed on the screen.
14. Antenna Recieves the video and sound from the baby unit.
15. Quad button Press this button to display the video of all 4 cameras simultaneously. Press
the button again to exit the Quad mode. In the Quad mode, the screen displays cam 1, cam
2, cam 3 and cam 4 for each channel. When there is no signal from the baby unit or the
signal is too weak the screen will display “out of range” on the corresponding channel.
16. Nightlight button Press this button to remotely turn on/o the night
light on the baby unit (when multiple baby units are used the nighlight
of the unit currentlly being displayed on the screen will be turned on/
o). When the nightlight is on, an indication icon
will be displayed on
the screen.
17. VID OFF button Press the video button to switch to the sound only mode. In this mode
the screen is turned o. Press the button again to return from the sound only mode to the
sound and video mode.
18. Scan button When this button is pressed, the screen is turned o. During this time the
parent unit will continuously scan the baby unit (or multiple baby units). When a sound is
detected, the parent unit will become active. The screen is turned back on, now you can
see what happens in the baby room. You can adjust the sound sensitivity for this detection
with the rotary knob at the side of the camera. After the parent unit has detected sound
it will take about 5 seconds to switch back to the scan mode. Except when the sound is
1
3
2
4
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Luvion PRESTIGE TOUCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Luvion PRESTIGE TOUCH in the language / languages: French, Polish, Spanish, Norwegian as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Luvion PRESTIGE TOUCH

Luvion PRESTIGE TOUCH User Manual - English, Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info