667647

Luvion Prestige Touch 2 Manual

25
Zoom out
Zoom in
Previous page
1/102
Next page
29
LUVION
Premium Baby products
1. Power LED and Sound Bar - The  rst LED indicates whether the parent unit is switched on. The other
LED’s indicate the level of sound detected by the baby unit. The amount of LED’s that are lit up indicate
the intensity of the detected sound.
2. Microphone The sounds detected by this microphone will be transmitted to the baby unit (camera)
when the Talk button is pressed.
3. Play/Pause / Play/Stop a lullaby, the unit will automatically play through all lullabies.
4. Next Song button Skips to the next lullaby.
5. Record button Use this button to capture a video recording. A SD-card (is required to capture a
recording. When activated, the recording icon will now appear on the screen.
6. Cam button Press the Cam button to switch between the di erent cameras connected to the parent
unit. The channel indicator identi es the di erent cameras.
7. Zoom button Press this button to zoom in on the video. The video will then be doubled in size. 2X will
appear on the screen. When the video is magni ed, you can use the joystick to navigate to parts of the
video that are outside the range of the screen. Press zoom again to exit zoom mode.
8. Night light button Our baby units are  tted with a special night light to comfort your child. Press this
Button to remotely (de-)activate the night light of the baby unit (When multiple baby units are in use,
the night light of the unit of which the video is currently displayed on the screen is controlled). The
night light icon will appear on the screen when the night light of the baby unit is activated.
9. Menu button Use the Menu button to open the main menu. Use it in a menu to close a menu (or move
up a level) without saving any new settings.
10. Joystick Use the joystick to move the camera lens of the baby unit and within in the menu to change a
selection. Press the joystick to con rm a selection and to save your setting.
11. Screen 4,3” TFT LCD Screen.
12. Talk button Press this button to speak through the baby unit to your child. Wait before
speaking until the Talk icon is displayed on the screen. You can increase the volume by
using the volume button on the baby unit. When multiple cameras are used, you will
speak only through the baby unit that is being displayed on the screen.
13. Antenna Sends & receives data to the baby unit.
14. Increase button Press this button to increase the volume of the monitor
15. Decrease button Press this button to decrease the volume of the monitor
16. VID OFF button Press the video button to switch to the sound only mode. In this mode the screen is
turned o . Press the button again to return from the sound only mode to the sound and video mode.
17. Scan button When this button is pressed, the screen is turned o . During this time the parent unit will
continuously scan the baby unit (or multiple baby units). When a sound is detected, the parent unit
will become active. The screen is turned back on, now you can see what happens in the baby room.
You can adjust the sound sensitivity for this detection with the rotary knob at the side of the camera.
After the parent unit has detected sound it will take about 5 seconds to switch back to the scan mode.
Except when the sound is continously detected. In that case the monitor will be activated for another
5 seconds.There are 2 reasons to use the scan button: 1- to prevent you from being disturbed by the
bright LCD screen, or 2- to save energy. Press the scan button again to deactivate the scanmode.
18. Speaker Produces the sound from the baby unit.
19. SD Slot Insert a SD card (Not included) in this slot to enable the recording functions. The parent unit
supports SD cards with memory up to 32 GB.
20. Foot Enables you to position the parent unit on a  at surface.
21. Battery compartment This compartment allows the battery to be replaced. Only use original Luvion
batteries.
22. DC in Connect the included DC 5V power adapter to power and/or charge the parent unit.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Luvion Prestige Touch 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Luvion Prestige Touch 2 in the language / languages: English, German, Dutch, French, Norwegian as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info