708403
39
Zoom out
Zoom in
Previous page
1/60
Next page
Storage
1、 Drain the carburetor by loosening the screw.
Drain the gasoline into a suitable container.
WARNING
Gasoline is extremely flammable and is explosive under certain
conditions. Perform task in a well-ventilated area with the engine stopped. Do not smoke or allow flames or
sparks in the area during this procedure.
2、 Change the engine oil (see page 25-26).
3、 Remove the spark plug, and pour about a tablespoon of clean engine oil into the cylinder. Crank the
engine several revolutions to distribute the oil, then reinstall the spark plug.
4、 Slowly pull the starter grip until resistance is felt.
At this point, the piston is coming up on its compression
stroke and both the intake and exhaust valves are
closed. Storing the engine in this position will help
to protect is from internal corrosion.
ASSEMBLY OF
PARTS
-
- 39 -
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lumag KB5000GFE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lumag KB5000GFE in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info