698663

LSC SmartConnect (Action) Smart Remote Manual

2
Zoom out
Zoom in
Previous page
1/12
Next page
2
EN Getting started
Note: this item only works with LSC Smart Connect lamps and plugs.
Before you get started, make sure that the lamp or plug that you want to connect with the
remote control has already been added in the LSC Smart Connect app.
Switch the device o and on ONE time to get the device into learning mode for the duration
of 20 seconds.
Press and hold the ON button on the remote control until the lamp or
plug indicator flashes three times, remote flashes 3 times. Pairing succeded.
Lamps can be adjusted step by step in brightness in steps of 20%.
You can connect a lamp or plug to a maximum of five remote controls.
To disconnect, press the power OFF button for five seconds. All connected lamps, plugs and
remote controls are now disconnected.
You can connect several lamps and plugs at the same time by turning them on and inside
20 seconds to complete the link as described above.
Declaration of Conformity
We, Electro Cirkel Retail BV, as importer declare that this “radio equipment” is produced in China. The products passed all tests according to all re-
levant CE standards and regulations. The complete list of harmonized standards regarding directive 2014/53/EU can be found at: https://ec.europa.
eu/growth/single-market/european-standards/harmonised-standards/red_en
The complete Declaration of Conformity can be found at www.lsc-smartconnect.com For other compliant-related information please contact:
Website: www.lsc-smartconnect.com, email: service@lsc-smartconnect.com,
Phone: +31 (0) 228 565 080, Postal: Perenmarkt 15, 1681 PG, Zwaagdijk, the Netherlands
Safety:
- The adaptor (if applicable) must be installed nearby the device, not connected to another adaptor and easy accessible;
- This product should only be opened by an authorized technician when service is required;
- Only use this device for intended purpose;
- Do not use this device if damaged or defective. In this case, replacement is required;
- This device is designed for in-doors use only. Do not use this device outdoors.
Disposal This product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
Warranty: Any changes and/or modifications to the product will void the warranty. We cannot accept any liability for damage caused by incorrect use
of the product. Disclaimer: Designs and specifications might be subjected to change without notice. All logos, brands and used product references
are trademarks or registered trademarks of their respective holders and hereby recognized as such.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LSC SmartConnect (Action) Smart Remote at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LSC SmartConnect (Action) Smart Remote in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info