28405
19
Zoom out
Zoom in
Previous page
1/80
Next page
15
Epoxy transducer to hull.
Place the transducer into the epoxy, twisting and turning it to force
any air bubbles out from under the transducer face. The face of the
transducer should be parallel with the hull, with a minimum amount
of epoxy between the hull and transducer. After the epoxy dries, re-
member to fill in the area around the transducer with more epoxy
and route the cable to the sonar unit.
Speed/Temperature Sensors
The X67C can accept as many as two temperature sensors, which can be
used to monitor the temperature of surface water, a live well or some
other location. These units can accept an optional speed sensor for show-
ing speed and distance traveled. However, you can only use one accessory
at a time. If you would like to use a speed sensor and a secondary tem-
perature sensor at the same time, you will need a combination device.
NOTE:
If a second temp sensor is used, it must be the model TS-2U. This
model has a fixed electronic "address" which designates it as the
second of two temp sensors.
Spread epoxy here
Sand this surface
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance X67C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance X67C in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info