599354
19
Zoom out
Zoom in
Previous page
1/52
Next page
15
In-dash mounting template for X47EX, showing dimensions. NOTE: The
preceding figure is not printed to scale. A scaled template is available
for free download from our web site, www.lowrance.com.
For the X47
The X47 can be mounted in-dash using the removable scaled template
inside the back cover of this manual (page 43). The FM-6 mount kit
includes the necessary materials, but the instructions only appear here
in this manual.
Please read all the instructions before proceeding. NOTE: Recommended
tools for this job include: jig saw, drill, drill bit (for starting hole).
1. Select the desired mounting location. Make sure there is enough room
behind the dash to attach the unit's cable. The case is approximately
1-3/4" (45 mm) behind the mounting surface. You also need to allow an
additional 1" (25 mm) for the power/transducer cable and connector.
2. Cut or tear out the template in the back of this manual (page 43) and
tape it to the dash. Begin the cutout by drilling a starter hole near the
center of the template. Use a drill bit big enough for the jigsaw blade.
3. Slip your saw blade into the starter hole and then cut along the
outside line. Be careful when working around the corners, because
there is little room for error.
4. Remove the backing from one side of the double-sided mounting tape
contained in the mounting kit. Apply it to the outer ledge on the back
of your unit. Starting at the bottom center, work the tape around all
four sides of the unit. Cut off any excess tape when finished.
5. Attach the power/transducer cable to the back of the unit.
Millimeters
[Inches]
ALWAYS VERIFY DIMENSIONS
In-Dash
Template
R 7.9
[0.31]
Top
113.5
[4.46]
146.5
[5.76]
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance X47EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance X47EX in the language / languages: English as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info