Manual Lowrance X126DF (page 69 of 92) (English)

28389

Zoom out

Zoom in

1/92

Automatic Sensitivity

The default sensitivity mode is automatic. The unit bases the sensitiv-

ity level on water depth and conditions. When the unit is in the auto-

matic mode, sensitivity is automatically adjusted to keep a solid bottom

signal displayed, plus a little more power. This gives it the capability to

show fish and other detail.

However, situations occur when it becomes necessary to increase or de-

crease the sensitivity. This typically happens when you wish to see

more detail, so an increase in sensitivity is indicated. Or, wave action

and boat wakes can create enough tiny air bubbles to clutter much of

the water column. In that case, a decrease in sensitivity is indicated to

reduce some of the clutter.

The control bar used to adjust sensitivity up or down is the same

whether the unit is in the automatic or manual mode. In automatic you

can adjust sensitivity up to 100 percent but the unit will limit your

minimum setting. In auto, the unit will continue to make small ad-

justments, allowing for the setting you selected.

In manual mode, you have complete control over sensitivity, with the

ability to set it anywhere from zero to 100 percent. Once you select a

level in manual, the unit will continue to use that exact sensitivity set-

ting until you change it or revert to auto mode.

To adjust sensitivity in auto mode:

1. Press

MENU|ENT.

2. The Sensitivity Control Bar appears. Press ↓ to decrease sensitivity;

press ↑ to increase sensitivity. When it's set at the desired level, press

EXIT. (When you reach the maximum or minimum limit, a tone sounds.)

At left, Sonar Menu with Sensitivity command selected. At right, the

Sensitivity Control Bar.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance X126DF in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lowrance X126DF Manual

Product: