599364
3
Zoom out
Zoom in
Previous page
1/44
Next page
1
INTRODUCTION
Thank you for purchasing an X-70A 3D. Its adjustable VariView™ 3D per-
spective lets you rotate the underwater picture to accommodate specific
viewing needs. In addition to the 3D views, the X-70A 3D also gives you
outstanding 2D detail using either the supplied 384 kHz transducer or an
optional 192 kHz transducer.
SPECIFICATIONS
Dimensions..................................... 5 7/8" H x 7 3/4"W x 3 7/8"D
Transmitter Frequency .................... 384 kHz and 192 kHz
Transmitter Power ...........................3000 watts (peak-to-peak, typical)
375 watts (RMS, typical)
Display............................................ Supertwist LCD
200 vertical x 320 horizontal
64,000 total pixels
NOTICE!
The storage temperature for your unit is from -4 degrees to +167 degrees
Fahrenheit (-20 degrees to +75 degrees Celsius). Extended storage in
temperatures higher or lower than specified will damage the liquid crystal
display. This type of damage is not covered by the warranty.
INSTALLATION
TOOLS AND HARDWARE YOU WILL NEED
Screwdriver
Four #10 screws with flat washers or up to 1/4" screws (to attach gimbal
bracket to dash)
Hand-held drill with a 5/32" drill bit
Marine grade caulking compound
TRANSDUCER INSTALLATION:
The HS-3D4 supplied with your X-70A 3D is a 384 kHz, 4 element, high-
speed, transom mount transducer. It can be installed on any outboard or
stern-drive (inboard-outboard) powered boat. The built-in “kick-up” bracket
helps prevent damage if the transducer strikes an object while the boat is
moving. If the transducer does “kick-up”, it can be pushed back in place
without tools.
Read this section carefully before attempting the installation. Determine
the best mounting location for your boat. Remember, the transducer loca-
tion is the most critical part of a sonar installation. If it isn’t done properly,
the sonar can’t perform to it’s designed potential.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance X-70A 3D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance X-70A 3D in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info