522493
5
Zoom out
Zoom in
Previous page
1/22
Next page
5
Traditional Sonar
slots in the transducer mounting bracket to loosen
the screws and slide the transducer up or down, if
adjustments are necessary.
Shoot-thru-hull Skimmer and
Pod transducer installation
Before attempting any installation on boats with
otation material sandwiched within the hull, con-
sult the boat manufacturer. In a shoot-thru-hull in-
stallation the transducer is epoxied to the inside of
the boat hull.
A transducer can not shoot through wood or metal
hulls. Wood and metal hulls require either a tran-
som mount or thru-hull installation. For shoot-
thru-hull applications many boat hulls have a at
keel pad that oers a good transducer mounting
surface.
Make sure the Skimmer transducer is oriented so
the nose of the transducer is facing the bow (front)
of the boat. If the transducer has a built in temp
sensor, it will only show the temperature of the
hull, not the water temp.
Before you epoxy the transducer to the hull, make
sure the area is clean, dry and free of oil or grease.
The surface of the hull must be at so the entire
Transducer epoxied to hull
Epoxy
Transducer
Hull
Keel pad
On vee hulls
try to place the
transducer where
the dead rise is
10° or less.
WARNING: Do not remove material
from the inner hull. Careless grinding
on the hull could damage hull integrity.
Contact the boat dealer or manufacturer
to conrm hull specications
.
0.TWEETY INSTALL_SONAR_DSI.indd 5 9/14/2011 11:55:31 PM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance Mark 4X DSI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance Mark 4X DSI in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance Mark 4X DSI

Lowrance Mark 4X DSI User Manual - English - 26 pages

Lowrance Mark 4X DSI User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info