Manual Lowrance LMS 522c igps (page 23 of 252) (English)

40420

Zoom out

Zoom in

1/252

Section 2: Installation

Preparations

You can install the sonar and GPS systems in some other order if you

prefer, but we recommend this installation sequence:

Caution:

You should read over this entire installation section before drill-

ing any holes in your vehicle or vessel!

1. Determine the approximate location for the sonar/GPS unit, so you

can plan how and where to route the cables for the antenna, transducer

and power. This will help you make sure you have enough cable length

for the desired configuration.

2. Determine the approximate location for the transducer and its cable

route.

3. Determine the approximate location for the GPS antenna module

and its cable route.

4. Determine the location of your battery or other power connection,

along with the power cable route.

5. Install the transducer and route the transducer cable to the so-

nar/GPS unit.

6. Install the GPS antenna and route the antenna cable to the so-

nar/GPS unit.

7. Install the power cable and route it to the sonar/GPS unit.

8. Mount the sonar/GPS unit to the bracket.

Transducer Installation

These instructions will help you install your Skimmer

transducer on a

transom, on a trolling motor or inside a hull. These instructions cover

both single- and dual-frequency Skimmer transducers. Please read all

instructions before proceeding with any installation.

The smaller single-frequency Skimmers typically use a one-piece,

stainless steel mounting bracket. The larger dual-frequency Skimmers

typically use a two-piece, plastic mounting bracket. The trolling motor

mount uses a one-piece plastic bracket with an adjustable strap.

These are all "kick-up" mounting brackets. They help prevent damage

if the transducer strikes an object while the boat is moving. If the

transducer does "kick-up," the bracket can easily be pushed back into

place without tools.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS 522c igps in the language / languages: English as an attachment in your email.

The manual is 6,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lowrance LMS 522c igps Manual

Product: