599325
87
Zoom out
Zoom in
Previous page
1/93
Next page
84
The LMS-350A doesn't save the Man Overboard position in the waypoint
table. However, it does save the position on the Man Overboard screen.
The LMS-350A always shows navigation data to the position shown on the
Man Overboard screen whenever the Man Overboard key is pressed. To
stop the unit from navigating to the Man Overboard position, press the key
next to the "DISABLE MOB" label. This resets the Man Overboard
navigtion. For example, suppose you are viewing the Position screen, and
you press the Man Overboard key, then press the GPS key. The LMS-
350A first displays then stores your present position on the Man Over-
board screen, then switches back to the Position screen. If you press the
Man Overboard key again, it will still show navigation data to the position
you were in when you first pressed the Man Overboard key - not your
present position. Repeated pressing of the Man Overboard key does not
repeatedly save your present position! The unit only saves the position the
first time the Man Overboard key is pressed. To save a new Man
Overboard postion, you must first clear the old position by pressing the key
adjacent to the "DISABLE MOB" label.
You can navigate to a waypoint using the Waypoint Recall feature,
however when you go back to the Man Overboard screen, the AccuNavII
stops navigating to the recalled waypoint and show navigation data to the
Man Overboard location.
Remember, saving the victim is the primary goal. Try all options to rescue
the person immediately after the accident happens. Training and educa-
tion are also good accident preventatives. The Coast Guard has
excellentsafety courses. Instruct all members on board your boat on
safety procedures before leaving the dock. Make certain all on board know
what to do before any emergency occurs.
GPS MODULE SELF-TEST
This feature tests the GPS module and returns a special code. This code
is of interest only to the service department. However, the LMS-350A
interprets this code and displays a status message. This message is either
“MODULE HAS PASSED” or “MODULE HAS FAILED” and shows at the
bottom of the screen. The current software version number also appears
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-350A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-350A in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info