599316

Lowrance LMS-160 - GlobalMap 1600 Manual

68
Zoom out
Zoom in
Previous page
1/92
Next page
62
The Surface Clarity Control (SCC) reduces or eliminates surface clutter
signals from the display. SCC varies the sensitivity of the receiver, de-
creasing it near the surface and gradually increasing it as the depth in-
creases.
There are three levels of SCC available on this
unit: low, medium, and high. When it’s turned on
for the first time, the SCC level is low. To change
it, press the MENU key, then select “SONAR
OPTIONS”. The screen at righ appears. Use the
up or down arrow keys to select the SURFACE
CLARITY menu. Now use the left or right arrow
keys to change it. When you’re finished, press
the EXIT key to erase the menus.
ASP (Advanced Signal Processing)
The ASP feature is a noise rejection system that constantly evaluates the
effects of boat speed, water conditions, and interference. This automatic
feature gives you the best display possible under most conditions.
The ASP feature is an effective tool in combating noise. In sonar terms,
noise is any undesired signal. It is caused by electrical and mechanical
sources such as bilge pumps, engine ignition systems and wiring, air
bubbles passing over the face of the transducer, even vibration from the
engine. In all cases, noise can produce unwanted marks on the display.
The ASP feature has two levels - Normal and High. If you have high noise
levels, try using the “High” ASP setting. However, if you are having trouble
with noise, we suggest that you take steps to find the interference source
and fix it, rather than continually using the unit with the high ASP setting.
However, there are times when you may want to turn the ASP feature off.
This lets you view all incoming echoes before they are processed by the
ASP feature.
To change the ASP level, press the MENU key. select "SONAR SETUP",
then “SONAR OPTIONS”, and finally press the up or down arrow keys
until the “ASP” menu appears, as shown at the top of this page. Now use
the left or right arrow keys to change it. When you’re finished, press the
EXIT key to erase the menu.
RANGE - Automatic
When turned on for the first time, the bottom signal is automatically placed
in the lower half of the screen. This is called Auto Ranging and is part of
the automatic function. Typically, the range cannot be changed manually
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-160 - GlobalMap 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-160 - GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info