599316

Lowrance LMS-160 - GlobalMap 1600 Manual

50
Zoom out
Zoom in
Previous page
1/92
Next page
44
ROUTES
You can connect several user waypoints together to form a route. When
you recall the route, the unit shows navigation information to the first way-
point in the route, then when you reach that waypoint, it switches to the
next waypoint, and so on until you reach the last waypoint in the route.
To create a route, first press the MENU key, high-
light the “ROUTE PLANNING” label, and press
the right arrow key. The screen shown at right
appears.
This unit can store up to 99 routes. Route num-
ber one shows on this page. If you wish to create
a route using a different number, simply press
the left or right arrow keys until the desired route
number appears. In this example, however, we’ll use route number one.
If you wish to name the route, highlight the “EDIT ROUTE NAME” label
and press the right arrow key. Use the arrow keys to name the route, (you
can use up to eight characters in the name) then press the ENT key when
you’re finished.
The gray boxes in the lower portion of the screen
comprise the list of waypoints that form the route.
To add waypoints to the route, highlight the first
gray box and press the right arrow key. The screen
shown at right appears. To add a waypoint to the
route from the waypoint table, select the “ADD
WPT” label. To select a waypoint from the map,
choose “ADD FROM MAP”.
Add From Waypoint List
This screen is virtually identical to the waypoint
screen Select a waypoint either by using the way-
point number, waypoint name, or from the way-
point list. After selecting the waypoint, highlight
the “ADD TO ROUTE” label and press the right
arrow key. The unit returns to the route screen
with the first waypoint at the top of the list. High-
light the next waypoint location beneath the first
waypoint and press the right arrow key. Now re-
peat the previous steps to select the second waypoint for your route. After
selecting the second waypoint, the unit returns to the waypoint list screen.
The second waypoint shows beneath the first one, with bearing and dis-
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-160 - GlobalMap 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-160 - GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info