599316

Lowrance LMS-160 - GlobalMap 1600 Manual

45
Zoom out
Zoom in
Previous page
1/92
Next page
39
this example. Now select “CREATE WAYPOINT”,
then “PROJECT POSITION”. The screen shown
at the the bottom of the previous page appears.
The unit needs a location (reference waypoint)
to project the new waypoint from. The default ref-
erence is waypoint number one. Highlight the
“REFERENCE WPT” label on the Project WPT
menu and press the right arrow key. The screen
below right appears. Select a waypoint using ei-
ther the waypoint number or waypoint list. In this
example, waypoint 4 was chosen. When you’ve
chosen the waypoint, highlight the “SET REFER-
ENCE” label and press the right arrow key. The
unit returns to the Project WPT screen shown
above. The starting waypoint you chose shows
in the middle of this screen. Now set the distance
from the starting waypoint to the projected way-
point by highlighting the “SET DISTANCE” label
and pressing the right arrow key. Use the arrow
keys to set the distance, then press the ENT key
when you’re finished. The unit returns to the
Project Position screen. Now enter the bearing
from the starting waypoint to the projected way-
point by selecting “SET BEARING” from the
Project Position screen.
Once you’ve entered the bearing, the unit returns
to the Project Position screen with the distance
and bearing from your present position showing at the bottom of the screen,
as shown at right. In this example, the new waypoint is 3.53 miles on a
bearing of 68° from our position. Now press the ENT key. The unit saves
the projected location under the waypoint number that you picked at the
beginning.
SELECTING A WAYPOINT
In order to edit or navigate to a waypoint, you
must first select it. There are three ways to do
this: by waypoint number, waypoint list, or search
by name. All selection methods are on the main
waypoint menu shown at right.
To select a waypoint by its number, simply high-
light the “WAYPOINT #” label at the top of the
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-160 - GlobalMap 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-160 - GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info