Manual Lowrance LMS-160 - GlobalMap 1600 (page 37 of 92) (English)

599316

Zoom out

Zoom in

1/92

Group F

This group shows your present position (POSI-

TION) in latitude/longitude at the top of the

screen, and in UTM at the bottom. You can change

the type of position display on both the top and

bottom of this (and all) screens by pressing the

MENU key, then selecting "GPS SETUP". Now

select "POSITION FORMAT" to change the top

position display, or "ALTERNATE FORMAT" to

change the bottom display.

Group G

The group G screen shows DGPS information.

There must be a DGPS receiver connected to

the unit in order to use this screen.

The DGPS status, station’s ID number, frequency,

bit rate, signal strength, bit rate, signal to noise

ratio (SNR), and time since the GPS receiver re-

ceived the satellite corrections (AGE) all show in

the top half of this screen.

The DGPS corrections at the bottom of the screen shows a list of the

satellites in view. The satellite’s number is follow by an identifier showing

its status. They are as follows:

OK DGPS corrections are in use by GPS receiver and corrections

are available.

OLD Unit hasn’t received corrections in last 60

seconds.

NA No correction available.

Group H

This is a time screen. An analog clock shows in the top left corner, fol-

lowed by a digital clock showing your local time

on the right. The clock’s alarm setting shows in

this window, also. UTC time shows at the bottom

right corner of this screen. (UTC is the time at

the prime meridian. It used to be called GMT.)

Battery voltage and estimated time of arrival

(ETA) complete this group.

To set the clock alarm, first press the MENU key,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-160 - GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lowrance LMS-160 - GlobalMap 1600 Manual

Product: