Manual Lowrance LCX25C (page 29 of 208) (English, Dutch)

28369

Zoom out

Zoom in

1/208

layers. The sonar signal must pass through solid fiberglass. A

successful transducer installation can be made on hulls with flotation

materials (such as plywood, balsa wood or foam) between layers of

fiberglass if the material is removed from the chosen area.

Use epoxy to place the transducer in a solid portion of the hull.

For example, some (but not all) manufacturers use a layer of fiberglass,

then a core of balsa wood, finishing with an outer layer of fiberglass.

Removing the inner layer of fiberglass and the balsa wood core exposes

the outer layer of fiberglass. The transducer can then be epoxied

directly to the outer layer of fiberglass. After the epoxy cures for 24

hours, fill the remaining space with polyester resin. When the job is

finished, the hull is watertight and structurally sound. Remember, the

sonar signal must pass through solid fiberglass. Any air bubbles in the

fiberglass or the epoxy will reduce or eliminate the sonar signals.

WARNING:

Do not remove any material from your inner hull unless

you know the hull's composition. Careless grinding or

cutting on your hull can result in damage that could

sink your boat. Contact your boat dealer or

manufacturer to confirm your hull specifications.

Testing Determines Best Location

Ideally, the shoot-thru transducer should be installed as close to the

transom as possible, close to the centerline. This will give you the best

performance during high speed maneuvers.

Inner hull

Epoxy to hull first

Outer hull

Flotation material

Fill with resin

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LCX25C in the language / languages: English, Dutch as an attachment in your email.

The manual is 11,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lowrance LCX25C Manual

Product: