599308
21
Zoom out
Zoom in
Previous page
1/76
Next page
17
Transducer Frequency
This unit operates from both 200 kHz and 50 kHz. The default frequency
is 200 kHz. It’s best for use in shallow water. The 50 kHz frequency is best
for deep water, especially saltwater. Use the arrow keys to highlight the
desired frequency, then press the ENT key to select it.
Surface Clarity
The markings extending downward from the zero line on the chart are
called “surface clutter”. These markings are caused by wave action, boat
wakes, temperature inversion, and more.
The surface clarity control reduces or eliminates surface clutter signals
from the display. It does this by changing the sensitivity of the receiver,
decreasing it near the surface and gradually increasing it as the depth
increases. The maximum depth that the surface clarity control can affect
is 75% of the selected depth range. For example, on a 0 - 60 foot range
with surface clarity control set to high, surface clutter will be reduced down
to 45 feet.
There are three levels of surface clarity available: low, medium, or high. It
can also be turned off. The default level is low. To change it, highlight
“Surface Clarity” on the “Sonar Features” menu, then press the ENT key
to select it. Use the cursor keys to highlight the desired level of surface
clarity, then press the ENT key.
Noise Rejection
The automatic noise rejection system built into this unit constantly evalu-
ates the effects of boat speed, water conditions, and interference from
electrical and mechanical sources such as bilge pumps, engine ignition
systems and wiring, even engine vibration. It then works to reduce or
eliminate the negative effects on the sonar screen. This gives the best
display possible under most conditions.
The Noise Rejection system is an effective tool in combating noise. In
sonar terms, noise is any undesired marks on the display.
This unit has two levels of noise rejection: normal and high. It can also be
turned off. The default is normal. To change it, highlight “Noise Rejection”
on the “Sonar Features” menu, then press the ENT key to select it. Use
the cursor keys to highlight the desired level of noise rejection, then press
the ENT key.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LCX-15CT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LCX-15CT in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info