599173
45
Zoom out
Zoom in
Previous page
1/66
Next page
| 43
Software setup | HDS Gen3 Installation Manual
Upgrading module  rmware
The  les page also allows the loading of CZone module  rmware
updates. For further information refer to “NMEA 2000 and Ethernet
device upgrades on page 52
NMEA 0183 setup
The NMEA 0183 port must be set to suit the speed of connected
devices, and can be con gured to output only the sentences
required by listening devices.
Receive waypoint
Select this option to allow a device
capable of creating and exporting
waypoints via NMEA 0183 to transfer
directly to the HDS Gen3.
Baud rate
This should be set
to correspond with
devices connected to
the NMEA 0183 input
and output. The input
and output (Tx, Rx) use
the same baud rate
setting.
Note: AIS transponders typically operate at NMEA 0183-HS (high
speed), and will require the baud rate to be set to 38,400.
Serial Output
Selection will determine whether the data is output via Tx lines, and
will enable editing of the output sentences list.
Serial Output Sentences
This list allows control over which sentences need to be transmit
to other devices from the NMEA 0183 port. Due to the limited
bandwidth of NMEA 0183 it is desirable to only enable the data that
is required. The less sentences are selected, the higher the output
rate of the enabled sentences.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance HDS Gen3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance HDS Gen3 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance HDS Gen3

Lowrance HDS Gen3 User Manual - English - 184 pages

Lowrance HDS Gen3 Quick start guide - German - 8 pages

Lowrance HDS Gen3 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info