623837
50
Zoom out
Zoom in
Previous page
1/66
Next page
48 |
Software setup | HDS Gen3 Installation Manual
Mode (WIFI-1 only)
When more than one WIFI-1 device is
connected (i.e. on large installations), only
one may operate as ‘Primary. Primary mode
determines that the device is acting as
DHCP server - only one DHCP server may
exist on a network at a time.
To set a device as secondary, the HDS Gen3 must initially be
connected to only one WIFI-1 module, which should be set to
secondary. Once completed, a second module may be plugged in,
which will automatically default to primary.
Note: Use of multiple devices is solely for range extension purposes,
and is usually only required on larger vessels.
Channel
Channel setting is available in order to
overcome potential interference to the
GoFree device by another RF device
transmitting in the same frequency band.
Advanced
Tools are available within the HDS Gen3
software to assist in fault- nding and setting
up the wi network.
Iperf
Iperf is a commonly used network performance tool. Its provided
for testing wireless network performance around the vessel so weak
spots or problem areas can be identi ed. The application must
be installed on and run from the tablet device. The HDS must be
running Iperf server before initiating the test from the tablet. On
exiting the page, Iperf will automatically stop running.
DHCP Probe
The wireless module contains a DHCP server that will allocate
IP addresses for all the MFDs, radars and sonars in a network. If
integrating with other devices, such as a 3G modem or satellite
phone, other devices in the network may also be acting as DHCP
servers. To make it easy to  nd all DHCP servers on a network, dhcp_
probe may be run from the HDS.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance HDS-9 Gen3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance HDS-9 Gen3 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance HDS-9 Gen3

Lowrance HDS-9 Gen3 User Manual - English - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info