623837
33
Zoom out
Zoom in
Previous page
1/66
Next page
| 31
Software setup | HDS Gen3 Installation Manual
Source selection
Data sources provide live data such as GPS position, heading, wind
speed, and temperature. The data may originate from modules
internal to the device (eg internal GPS on some products), or
external modules connected via NMEA 2000 or NMEA 0183. Internal
sources presented on NMEA 2000 as virtual devices may include
sonar, MFD, Navigator, Pilot Controller, and iGPS. When a device
is connected to more than one source providing the same data,
the user has the  exibility to choose the prefered source. Before
commencing with source selection make sure all external devices
and the NMEA 2000 bus are connected and are turned on. If NMEA
0183 is used, complete “NMEA 0183 setup on page 43 prior to
doing source selection.
Note: High bandwidth external modules such as sonar and radar are
connected via ethernet, and are not handled under source selection.
Use the device speci c menus to select which device is set as the
source. This is only required when there are multiple sources, as
Ethernet modules are automatically detected and made available.
Device name
Assigning a name is useful in systems using more than one display
of the same type and size. When viewing data sources or the device
list, the assigned name will append the default product name +
virtual device function for easy identi cation. Using the Gofree app
on a tablet or phone will show available devices for connection
using only the assigned name.
Auto con gure
The Auto con gure option will look for all sources connected to
the device. If more than one source is available for each data type,
selection will be made from an internal priority list. This option will
be suitable for the majority of installations.
Note: Auto data source selection may already have been selected
at  rst time startup, however it should be redone if any new devices
have been added to the network since.
Data sources - manual source selection
Manual selection is generally only required where there is more
than one source for the same data, and the Auto con gure selected
source is not the one desired. Pressing the menu key when the
desired source is highlighted provides additional options:
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance HDS-9 Gen3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance HDS-9 Gen3 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance HDS-9 Gen3

Lowrance HDS-9 Gen3 User Manual - English - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info