599176
26
Zoom out
Zoom in
Previous page
1/52
Next page
25
Transducer epoxied to hull.
Transducer
Epoxy
Hull
Pod Transducer Installation Instructions
The following instructions explain how to install a Pod transducer inside a hull or on a trolling
motor. Read the following instructions carefully before attempting any installation. Use
extreme care when mounting a transducer inside a boat hull. Once epoxied into position, the
transducer can be very difcult to remove.
Note: Transducer location and installation is one of the most critical steps in sonar
installation.
Pod Transducer shoot-thru-hull installation
Before attempting any installation on boats with otation material sandwiched within the hull,
consult the boat manufacturer.
WARNING: Do not remove any material from the inner hull. Careless grinding or cutting
could damage the integrity of the hull. Contact the boat dealer or manufacturer to conrm hull
specications.
A transducer can not shoot through wood or metal hulls. Wood and metal hulls require either
a transom mount or “thru-hull” installation. For shoot-thru-hull applications many boat hulls
have a at keel pad that offers a good transducer mounting surface.
Note: The previous image shows a Pod transducer epoxied to a at, solid portion of the boat
hull near the transom. The transducer should be installed as close to the transom as possible,
close to the center line.
Before you epoxy the transducer to the hull, make sure the area is clean, dry and free of oil or
grease. The surface of the hull must be at so the entire transducer face is in contact with the
hull. Also, make sure the cable is long enough to reach the sonar unit before the transducer is
epoxied into place.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance HDS-7m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance HDS-7m in the language / languages: English as an attachment in your email.

The manual is 9,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance HDS-7m

Lowrance HDS-7m Quick start guide - English - 6 pages

Lowrance HDS-7m User Manual - English - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info