599180
40
Zoom out
Zoom in
Previous page
1/52
Next page
39
Commissioning Check List
Commissioning your system will improve the functionality and operation of your unit.
The following pages will give you an overview of the minimum settings we recommend you
set up before you start operating your HDS.
Please refer to the HDS operations guide for more information on how to change these
settings.
Language
Select the language used on menus and dialog boxes. The default language is English.
Units
Select which unit type you would like the HDS to display data in.
Time
Change local time to offset differences in time zone and to select the way time and date will
be displayed.
Note: The time and date will automatically set itself via the internal GPS antenna upon
initial startup, or reset.
Data Source
An advanced feature that allows you to use data from a network data source or data from a
sensor connected to your unit.
If, for example, you do not want to use your unit’s internal GPS antenna, you could use an
external GPS antenna connected to an ethernet or NMEA 2000 network.
Sonar Setup
To ensure proper sonar operation you need to select the proper transducer from the sonar
installation menu. This helps the HDS determine what settings and features will be available
in order to properly work with your transducer. To do this press Menu-Menu-Installation-
Transducer type- then select the appropriate transducer.
The HDS comes with either a 83/200kHz HST-WSBL, 50/200kHz HST-DFSBL, or if you
purchased a unit with no transducer select the appropriate one off of the drop down list.
The next step to ensure that your sonar is set up properly is to select the appropriate shing
mode for the depth of water you operate in and the type of shing that you are doing. These
shing modes set the HDS to use different ping speeds, bottom search ranges and color pallets
to optimize it for your type of shing.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance HDS-10m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance HDS-10m in the language / languages: English as an attachment in your email.

The manual is 9,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance HDS-10m

Lowrance HDS-10m Quick start guide - English - 6 pages

Lowrance HDS-10m User Manual - English - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info